Characteristics of The Products
The locking screw concept was produced by Dr. Tepic S and Dr. Perren SM for the first time in 1995. With locking compression plate put in use, it became one of the most important developments for plate and screw internal fixation in recent years. Locking screws provide the ability to create a fixed-angle construct while utilizing familiar conventional plating techniques. The fixed-angle construct function like a internal fixators which maintain primary and secondary loss of reduction. This kind construct also provides improved fixation in osteopenic bone or multifragment fractures where traditional screw purchase is compromised. LCP constructs do not relγ on plate-to-bone compression to maintain stability. Therefore, the periosteum will be protected and the blood supply to the bone preserved.
| P.N | Description | Qty. |
| 112100001 | Depth Gauge for φ2.5mm-φ4. 0mm Length 60mm | 1 |
| 112100002 | Plate Bender, left Length 190mm | 1 |
| 112100003 | Plate Bender, right Length 190mm | 1 |
| 112100004 | LC-DCP Drill Guide, Ø2.5/Ø3.5mm | 1 |
| 112100005 | Double Drill Sleeve I, Ø2.5/Ø3.5mm | 1 |
| 112100008 | Bending Template, large Length 118mm Width 10mm | 1 |
| 112100009 | Bending Template, small Length 92mm Width 10mm | 1 |
| 112100014 | Countersink Length 100mm | 1 |
| 112100015 | Drill Bit, Ø3.5mm Length 112mm Thread Length 60mm | 1 |
| 112100016 | Drill Bit, Ø2.5mm Length 112mm Thread Length 30mm | 2 |
| 112100017 | Hexagonal Screwdriver Shaft | 1 |
| 112100018 | Tap for Cortex Screw φ3.5mm Length 112mm Thread Length 30mm | 1 |
| 112100019 | Tap for Cancellous Bone Screw φ4.0mm Thread Length 20mm | 1 |
| 112100020 | Universal Drill Guide II, Ø3.5/2.5mm | 1 |
| 112100022 | Hexagonal Screwdriver with Holding Sleeve, Length 200mm | 1 |
| 112100024 | T-handle with Quick Coupling Length 90mm | 1 |
| 112200001 | Torque Limiter 1.5N Length 220mm | 1 |
| 112200002 | φ2.8Threaded Drill Sleeve for φ3.5mm | 2 |
| 112200003 | Stardrive Screwdriver Shaft, Length 120mm | 1 |
| 112200004 | φ2.8Drill Bit Length 165mm Thread Length 40mm | 2 |
| 112200005 | Easyout Length 80mm | 1 |
| 112200009 | Screw Driver Length 200mm | 1 |
| 112200010 | Bender for K-Wire | 1 |
| 112127000 | Screw Tray | 1 |
| 112128000 | Instrument Tray | 1 |
Q: Would you please give some information on shipping mode and charges?
A: Normally we send through courier, or post upon request from clients.
Q: Do you have ISO 9001, CE, or FDA approvals?
A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have FDA Registrations and CE mark for many of our products.
Q: What is the minimum order that we can place?
A: We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller samples orders in the beginning in order to test market our products . Samples against cost are available on request.
Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Q: Do you have stock for listed products, or they are newly produced?
A: Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.