Orthopedic Power Drill for Trauma and Joint Surgeries Cannulated Bone Drill
| Output Power | 130W |
| Speed(r.p.m) | 0-16000rpm |
| Noise(db) | ≤75 |
| Sterilization | ≤135ºC |
| Operation voltage(V) | 14.4V |
| Hand-piece Unit Rise in Temperature | ≤25ºC |
| Charging Time | About 3 hours |
| Gross Weight | 5KG |
| Radial Run-out | ≤ 0.5mm |
| Battery Type | Ni-MH |
| Charger Input Voltage | AC 220V, 50Hz |
| Charger Input Power | 30VA |
| Charger Output Power | 14.4V, 900mA |
2. Product Technical Merits
- Can be sterilized up to 135ºC
- Motor is imported from German
- Strong power ,low noise,small vibration
- Reduced the risk of surgery
- Variable speed and lightweight for better accuracy
- Axial run-out of concentrically is within 0.05mm.
- Multipurpose interface is easier to use in clinic
- 4.0mm hollow for all brand needles to pass through.
- Ni-MH battery without memory environment.
3. Product Display
Standard Configuration
-One drill chuck with key
-One battery
-One charger
-One hand piece
-One sterilizing channel
-One aluminium box
Technical Data
| Hand Piece | Working Voltage | 14.4V |
| Output Power | ≥ 20W | |
| Unit rise in temperature | ≤ 25° C | |
| Charger | Input Power | AC 220V, 50Hz |
| Output Power | 14.4V, 700mA | |
| Input Power | 30VA | |
| Battery | Voltage | 14.4V |
| Charging time | About 3 hours |
1.The device is forbidden to be demolished by non-professionals. If any problem, please contact with us for after sales service. |
2. The battery cannot be disinfected. |
3. The battery needs to be taken out of the machine's mobile phone, otherwise a small automatic discharge will shorten the battery life. |
4. The battery space should be dry after sterilization. |
5. Saw blade, the drill bit is cleaned with a purifier and kept dry after operation |
6. The sterilization temperature is lower than 135 degrees Celsius. If it exceeds 135 degrees Celsius, the motor will be damaged. |
7.Professional manufacturer with 24 hours online service , warranty offered, CE marked. |
